NACOMS PTFE SOLENOID VALVES S SERIES M SERIES A SERIES

NACOMS S SERIES PTFE SOLENOID VALVES  available in 2 way normal closed , 2 way normal open , 3 way configurations. The S series has a PTFE BODY and PTFE DIAPHRAGMS. 

S series valves have a oring type seat. Standard oring is VITON and can be upgraded to KALREZ

S series valves are available in ROUND BODY or SQUARE BODY SHAPES 

• ROUND BODY = 1/4-28 FEMALE THREAD / 1/8 FNPT
• SQUARE BODY = 1/8 FNPT / 1/8 TUBE

THE S SERIES PTFE SOLENOID VALVE  is fabricated with a BODY fabricated from compression molded free flow virgin PTFE and DIAPHRAGM(S) are fabricated from compression molded low flow virgin PTFE.  PFA bodes can be made in the round body  consult factory for more on this

THE S SERIES SOLENOID VALVES operate with a 5 watt pull type coil and can be purchased in voltages 

• 115 vac
• 230 vac
• 12 vdc
• 24 vdc
• 105 vdc

OPERATING PRESSURE  : 30 PSI

MEDIA TEMPERATURE : -50 TO +100 DEG C

AMBIENT TEMP -50 DEGREES TO +100 DEGREES C

CV FACTOR .03

FOR ADDITIONAL INFORMATION INCLUDING PART NUMBERS PLEASE REFER TO NACOM'S PTFE SOLENOID VALVES  S SERIES IN NACOM COMPONENT CATALOG