Think of NACOM for all of your Fluid and Gas handling components. Simply the best!
PTFE FITTINGS
PIPE FITTINGS
NACOM'S PTFE PIPE FITTINGS available in sizes starting at 1/8" diameter going up to 1.0" diameter as standard sizes . Up to 2.0" in custom sizes. Our pipe fittings consist in both MNPT and FNPT
- ELBOWS
- TEES
- REDUCERS
- COUPLERS
- NIPPLES
- BUSHINGS
- REDUCER BUSHINGS
- PLUGS
- CROSSES
COMPRESSION TUBE FITTINGS
NACOM'S PTFE COMPRESSION TUBE FITTINGS available in sizes 1/16" to 1.0" as a standard. Metric sizes are available also. As a standard PTFE FITTINGS are equipped with a PVDF NUT, PTFE FERRULE, KYNAR GRIPPER SET UP.
FITTINGS WITH TA NUTS or TS NUTS are equipped with a TEFLON NUT WITH ANODIZED ALUM BAND or STAINLESS STEEL BAND and a SINGLE SLEEVE SNAP IN PTFE FERRULE
- MALE CONNECTORS
- FEMALE CONNECTORS
- UNIONS
- REDUCING UNIONS
- BULKHEAD MALE CONNECTORS
- BULKHEAD FEMALE CONNECTORS
- UNION ELBOWS
- UNION ELBOW REDUCERS
- UNION TEES
- UNION CROSSES
- MALE BRANCH TEE
- FEMALE BRANCH TEE
- MALE RUN TEE
- FEMALE RUN TEE
- TUBE CAPS
- MALE ELBOW CONNECTOR
- FEMALE ELBOW CONNECTOR
THESE ARE BASED ON TUBE OD
FLARED FITTINGS
NACOM'S FLARED PTFE FITTINGS available in sizes 1/4" id to 1.0" id
Equipped with a PVDF NUT
- MALE CONECTOR
- FEMALE CONNECTOR
- MALE ELBOW CONNECTOR
- FEMALE ELBOW CONNECTOR
- UNION ELBOW
- UNION ELBOW REDUCER
- BULKHEAD UNION
- BULKHEAD MALE CONNECTOR
- BULKHEAD FEMALE CONNECTOR
- UNION TEE
- UNION TEE REDUCER
- UNION CROSS
- FLARE PLUG
THESE ARE BASE ON TUBE ID
OPERATING RANGE
Pressure rating
pressure 125 psi for 1/16 fittings decreasing to 30 psi for 1.0 fittings
TEMPERATURE
- -195 DegreesC to + 204 Degrees C
- _320 Degrees F to +400 Degrees F
MATERIALS STANDARD
FITTING BODIES ARE PRECISION MACHINED FROM FREE SINTERED 100% PURE VIRGIN PTFE HIGH DENSITY PTFE
OTHER INFORMATION
For additional information including part numbers and more detailed information please refer to the NACOM INDUSTRIES COMPONENT CATALOG PAGES PTFE FITTINGS